Belzona 1814 is a cost-effective 3-component repair system for the protection of surfaces subject to abrasive attack. This material is designed to provide protection in highly abrasive environments and is specifically formulated for application over large areas.
Supplied as a three-part system, with a base, solidifier and aggregate, Belzona 1814 is easy to mix and apply without the need for specialist tools. This thixotropic material will adhere to a wide range of substrates, providing a seamless abrasion resistant lining at thicknesses up to 12.7mm (1/2in).
Alternatively, for smaller application areas and faster cure, Belzona 1812 (Ceramic Carbide FP) has been developed.
Key benefits:
- High abrasion and wear resistance
- Will not corrode
- Solvent-free allowing it to be applied safely in confined areas
- Excellent bonding to many metal surfaces including steel and cast iron
- Application and cure at room temperature – no hot work involved
- Long working life
- High mechanical strength
Applications for Belzona 1814 include:
- Linings for worn hoppers, chutes, mixer blades and other equipment subject to abrasion
- Protection of hydrocyclones and grinding mills
- Bonding and grouting tiles and wear plates where high abrasion resistance is required
- Repair of screw conveyors, centrifuges and pump impellers damaged by erosion and corrosion
Key technical data: |
|
|---|---|
| Working life at 20°C (68°F) | 60 minutes |
| Time to full service cure 20°C (68°F) | 7 days |
| Abrasion resistance – Taber with 1kg load | H10 Wheels (Wet) – 51 mm³ loss per 1000 cycles, CS17 Wheels (Dry) – 7 mm³ loss |
| Tensile shear adhesion (ASTM D1002) | 1,370 psi (9.5 MPa) on blasted mild steel |
| Heat distortion temperature | 43°C (109°F) at 20°C (68°F) cure, 80°C (176°F) at 90°C (194°F) cure |
| Bonds to | Steel, cast iron, staineless steel and other metals and materials |
| Typical applications | Abrasion resistant lining or grouting system |
| Unit size | 30kg. Pack sizes may vary locally |
| Availability* | Global |
